欢迎访 问玖城润滑油官方网站!
400-6080-328
首页 >> 产品中心 >>金属加 工油液 >> 合成切 削液 semi synthetic cutting fluid
详细说明

合成切 削液 semi synthetic cutting fluid

产品简介
玖城牌半合成切 削液是合成极压型产品,不含矿物油,由多种优质进口水溶性添加剂采用先进工艺调制而成,适用于特殊硬质材料、合金钢、不锈钢。长寿命,长期使用不变质,优良防锈性,良好润滑性,和优越抗极压效果,具很好低 泡性,适用各种不同硬度、不同金属材质在CNC多刀具 加工中心使用。JC semi synthetic cutting fluid is a synthetic extreme pressure product without mineral oil.It is made up of many advanced imported water soluble additives using advanced technology refined.Suitable for special hard material, alloy steel and stainless steel.Long life, long-term use not metamorphic, excellent antirust, good lubricity,extreme anti -pressure effect, very good low bubble.Applicable to various hardness and different metal materials used in CNC multi-tool machining center.
收藏
产品编号 NC405 NC406
产品说明

玖城牌合成切 削液

产品型号:NC405 NC406

产品描述:玖城牌半合成切 削液是合成极压型产品,不含矿物油,由多种优质进口水溶性添加剂采用先进工艺调制而成,适用于特殊硬质材料、合金钢、不锈钢。长寿命,长期使用不变质,优良防锈性,良好润滑性,和优越抗极压效果,具很好低 泡性,适用各种不同硬度、不同金属材质在CNC多刀具 加工中心使用。

产品特点:

优异的 润滑和冷却性能,可减轻刀具结屑瘤,提高加工件精度,降低刀具损耗

良好的 防锈、防腐性能,碱性低,对皮肤、眼睛无刺激

浓缩液 含且高,使用比例低,抗微生物性能好,工作液寿命长

加工时 渗透性好,清洗性好,对机床油漆无影响

产品应用:

适用于 金属的重负荷车削、铣削、磨削、钻削、攻丝等加工,能适合加工中心多刀具、多种金属混合加工的复杂状况,起润滑、冷却和防锈作用。

推荐使 用浓度3%10%

JC Synthetic Cutting Fluid

Product number:NC405 NC406

product description:

JC semi synthetic cutting fluid is a synthetic extreme pressure product without mineral oil.It is made up of many advanced imported water soluble additives using advanced technology refined.Suitable for special hard material, alloy steel and stainless steel.Long life, long-term use not metamorphic, excellent antirust, good lubricity,extreme anti -pressure effect, very good low bubble.Applicable to various hardness and different metal materials used in CNC multi-tool machining center.

characteristics:

Excellent lubrication and cooling performance can reduce the nodules of tools, improve machining accuracy and reduce tool wear.

Good anti-rust, anticorrosive properties, low alkalinity, no irritation to skin and eyes.

The concentrate has high content, low use ratio, good microbiological resistance and long service life.

Good permeability during processing, good cleaning, no effect on machine tool paint.

Recommended use:

It is suitable for metal heavy load turning, milling, grinding, drilling, tapping and so on. It can be suitable for the complex conditions of Multi Tool and metal mixed processing in the processing center, and it can play the role of lubrication, cooling and rust prevention.

Recommended using concentration of 3% to 10%.

产品参数

玖城牌半合成切 削液典型数据:Typical data of JC semi synthetic cutting fluid:

项目Project

典型数据Typical data

稀释液,% Diluent,%

5

PH值 PH value

8-9

消泡性ml/10min  Defoaming  ml/10min

2

腐蚀试 验(55±2

Corrosion test55±2

钢片Steel sheet

≥24h

铜片Copper sheet

≥4h

铝片Aluminum sheet

≥4h

防锈试验(35±2RH95%h)一级灰 口铁

Anti-rust test(35±2RH95%h)First grade gray iron

单片Monolithic

≥24h

叠片Lamination

≥4h

对机床 油漆的适应性Adaptability to machine tool paint

合格Pass

导航

联系我们

二维码

关注微 信公众号

 扫一扫 浏览手机站

电话:400-6080-328

邮箱:m@jc.hk.cn

传真:0512-67564519

地址:苏州市 吴中区天鹅荡路2号B1栋

×
友情链接:    23彩票计划   双龙彩票开奖网   重庆彩票开奖网   168开奖网官网   时分彩票网